Your cart
There are no more items in your cart
Size | 20 |
Stroke per gripper jaw | 6.5 mm |
Max. interchangeability | ≤ 0.2 mm |
Max. gripper jaw angular play ax, ay | < 0.5 deg |
Max. gripper jaw backlash Sz | < 0.02 mm |
Rotational symmetry | ≤ 0.2 mm |
Pneumatic gripper repetition accuracy | < 0.02 mm |
Type code | DHPS |
Number of gripper jaws | 2 |
Mounting position | Any |
Mode of operation | Double-acting |
Gripper function | Parallel |
Gripping force backup | During closing |
Design | Positively driven motion sequence Lever |
Guide | Sliding guide |
Position sensing | For proximity sensor |
Symbol | 00991895 |
Operating pressure | 4 bar ... 8 bar |
Max. operating frequency of pneumatic gripper | 3 Hz |
Min. opening time at 6 bar | 72 ms |
Min. closing time at 6 bar | 62 ms |
Operating medium | Compressed air as per ISO 8573-1:2010 [7:4:4] |
Information on operating and pilot media | Operation with oil lubrication possible (required for further use) |
Corrosion resistance class (CRC) | 1 - Low corrosion stress |
Ambient temperature | 5 °C ... 60 °C |
Mass moment of inertia | 1.494 kgcm² |
Maximum force on gripper jaw Fz, static | 250 N |
Maximum torque on gripper jaw, Mx static | 14 Nm |
Maximum torque on gripper jaw, My static | 14 Nm |
Maximum torque on gripper jaw, Mz static | 14 Nm |
Relubrication interval for guidance elements | 10 MioCyc |
Max. mass per external gripper finger | 250 g |
Product weight | 387 g |
Type of mounting | With internal thread and centering sleeve Via through-hole and centering sleeve Optionally: |
Pneumatic connection | M5 |
Note on materials | RoHS-compliant |
Cover cap material | PA |
Housing material | Wrought aluminum alloy Hard-anodized |
Gripper jaw material | High-alloy stainless steel |