Your cart
No hay más artículos en su carrito
| Product attributes | |
|---|---|
| Nominal size | 55 |
| Format | SNH - slimline, normal, high |
| Ball chain | Without roller chain |
| Material (profiled rail systems) | Carbon steel |
| Preload class | C2 – Average preload |
| Accuracy class | H - Highly accurate |
| Self-aligning for compensation of misalignments | Without self-alignment |
| Width of runner block [mm] | 100 |
| Length of runner block [mm] | 170.65 |
| Height of runner block [mm] | 68 |
| Height of runner block with guide rail [mm] | 80 |
| Lubrication | With preservation and without initial lubrication |
| Dynamic load capacity C [N] | 140400 |
| Footnote dynamic load capacity C | Determination of the dynamic load capacities and load moments is based on a 100,000 m travel as per DIN ISO 14728-1. Often only 50,000 m are actually stipulated. For comparison: Multiply values C, Mt and ML from the table by 1.23. |
| Dynamic torsional moment load capacity Mt footnote | Determination of the dynamic load capacities and load moments is based on a 100,000 m travel as per DIN ISO 14728-1. Often only 50,000 m are actually stipulated. For comparison: Multiply values C, Mt and ML from the table by 1.23. |
| Static longitudinal moment load capacity ML0 [Nm] | 5290 |
| Static torsional moment load capacity Mt0 [Nm] | 8350 |
| Max. acceleration amax [m/s²] | 150 |
| Footnote amax | Requirement: There must be preload, even during operation under load. |
| Maximum permissible linear speed vmax [m/s] | 4 |
| Dynamic torsional moment load capacity Mt [Nm] | 4120 |
| Dynamic longitudinal moment load capacity ML [Nm] | 2610 |
| Dynamic longitudinal moment load capacity ML footnote | Determination of the dynamic load capacities and load moments is based on a 100,000 m travel as per DIN ISO 14728-1. Often only 50,000 m are actually stipulated. For comparison: Multiply values C, Mt and ML from the table by 1.23. |
| Seal | DS – Double-lip seal |
| Static load rating C0 [N] | 284700 |
| Permissible ambient temperature | -10 °C ... +80 °C |
| Footnote permissible ambient temperature (min ... max) | 100 °C admissible for short time. For operation at lower minus temperatures, please consult us. |
| Friction coefficient μ | 0,0004 ... 0,001 |
| Footnote friction coefficient μ | Without friction of seal |
| Footnote friction force FR | Guideline value for frictional drags of the complete, sealed and lubricated roller runner blocks. |
| Weight [kg] | 5.04 |
