Your cart
There are no more items in your cart
Type code | MN1H |
Design | Diaphragm valve |
Actuation type | Electrical |
Sealing principle | Soft |
Mounting position | Any |
Type of mounting | Line installation |
Fitting connection | G1/2 |
Electrical connection | Form A Plug as per DIN EN 175301-803 Rectangular design |
Nominal width | 13 mm |
Valve function | 2/2, closed, monostable |
Manual override | Detenting via accessory Non-detenting |
Flow direction | Non-reversible |
Medium | Filtered compressed air, 200 µm filter mesh |
Exhaust air function | Without flow control option |
Coil characteristics | 110 V AC: 50 Hz, initial power 5.0 VA, holding power 3.7 VA 230 V AC: 50 Hz, initial power 5.0 VA, holding power 3.7 VA 230 V AC: 60 Hz, initial power 5.0 VA, holding power 3.7 VA 110 V AC: 60 Hz, initial power 5.0 VA, holding power 3.7 VA 24 V DC: 2.5 W |
Reset method | Pneumatic spring |
Type of control | Pilot-controlled |
Symbol | 00991399 |
Medium pressure | 0.5 bar ... 10 bar |
Information on operating and pilot media | Operation with oil lubrication possible (required for further use) |
Temperature of medium | -10 °C ... 60 °C |
Ambient temperature | -10 °C ... 60 °C |
Standard nominal flow rate | 3100 l/min |
On switching time | 30 ms |
Switching time off | 100 ms |
Housing material | Brass |
Material of screws | High-alloy stainless steel |
Material number of screw | 1.4301 |
Product weight | 400 g |
Degree of protection | IP65 With plug socket |