Your cart
There are no more items in your cart
| Size | 25 |
| Stroke per gripper jaw | 7.5 mm |
| Max. interchangeability | ≤ 0.2 mm |
| Max. gripper jaw angular play ax, ay | < 0.5 deg |
| Max. gripper jaw backlash Sz | < 0.02 mm |
| Rotational symmetry | ≤ 0.2 mm |
| Pneumatic gripper repetition accuracy | < 0.02 mm |
| Type code | DHPS |
| Number of gripper jaws | 2 |
| Mounting position | Any |
| Mode of operation | Double-acting |
| Gripper function | Parallel |
| Gripping force backup | During closing |
| Design | Positively driven motion sequence Lever |
| Guide | Sliding guide |
| Position sensing | For proximity sensor |
| Symbol | 00991895 |
| Operating pressure | 4 bar ... 8 bar |
| Max. operating frequency of pneumatic gripper | 2 Hz |
| Min. opening time at 6 bar | 68 ms |
| Min. closing time at 6 bar | 52 ms |
| Operating medium | Compressed air as per ISO 8573-1:2010 [7:4:4] |
| Information on operating and pilot media | Operation with oil lubrication possible (required for further use) |
| Corrosion resistance class (CRC) | 1 - Low corrosion stress |
| Ambient temperature | 5 °C ... 60 °C |
| Mass moment of inertia | 3.835 kgcm² |
| Maximum force on gripper jaw Fz, static | 350 N |
| Maximum torque on gripper jaw, Mx static | 30 Nm |
| Maximum torque on gripper jaw, My static | 30 Nm |
| Maximum torque on gripper jaw, Mz static | 30 Nm |
| Relubrication interval for guidance elements | 10 MioCyc |
| Max. mass per external gripper finger | 350 g |
| Product weight | 713 g |
| Type of mounting | With internal thread and centering sleeve Via through-hole and centering sleeve Optionally: |
| Pneumatic connection | G1/8 |
| Note on materials | RoHS-compliant |
| Cover cap material | PA |
| Housing material | Wrought aluminum alloy Hard-anodized |
| Gripper jaw material | High-alloy stainless steel |
