Your cart
There are no more items in your cart
KC characters | KC EMC |
Nominal width | 6 mm |
Type code | MPYE |
Actuation type | Electrical |
Sealing principle | Hard |
Mounting position | Any |
Design | Piston gate valve |
Reset method | Magnetic spring |
Safety instructions | MPYE safety position: if the power supply cable breaks, the blocked mid-position is approached. |
Type of control | Direct |
Flow direction | Non-reversible |
Symbol | 00995308 |
Valve function | 5/3, closed |
Reverse polarity protection | for setpoint value |
Operating pressure | 0 bar ... 10 bar |
b-value | 0.26 |
C value | 3.1 l/sbar |
Standard nominal flow rate | 700 l/min |
Cut-off frequency | 95 Hz |
Max. hysteresis | 0.4 % |
DC operating voltage range | 17 V ... 30 V |
Residual ripple | 5 % |
Setpoint/actual values | Current type 4–20 mA |
Operating medium | Compressed air as per ISO 8573-1:2010 [6:4:4] |
Information on operating and pilot media | Operation with oil lubrication not possible |
CE marking (see declaration of conformity) | As per EU EMC directive |
Corrosion resistance class (CRC) | 2 - Moderate corrosion stress |
Temperature of medium | 5 °C ... 40 °C |
Degree of protection | IP65 |
Ambient temperature | 0 °C ... 50 °C |
Certification | RCM compliance mark |
Product weight | 285 g |
Electrical connection | 4-pin M12x1 Plug Round design |
Type of mounting | With through-hole |
Pneumatic connection 1 | G1/8 |
Pneumatic connection 2 | G1/8 |
Pneumatic connection 3 | G1/8 |
Pneumatic connection 4 | G1/8 |
Pneumatic connection 5 | G1/8 |
Note on materials | RoHS-compliant |
Cover material | ABS Coated |
Seals material | NBR |
Housing material | Aluminum Anodized |