Your cart
There are no more items in your cart
Piston seal material | FPM HNBR TPE-U(PU) |
Piston rod wiper seal material | FPM HNBR PE TPE-U(PU) |
Cushion piston material | Wrought aluminum alloy POM |
Buffer seal material | FPM TPE-U(PU) |
Material of piston | Wrought aluminum alloy |
Collar nut material | Steel, galvanized |
Nut material | Steel, galvanized High-alloy stainless steel |
Bellows material | NBR PA |
Material of bearing | Bronze Metal polymer compound POM |
Tie rod material | High-alloy steel High-alloy stainless steel |
Rod wiper seal material | Brass PTFE-reinforced |
Spacer bolt material | High-alloy stainless steel |
Swivel mounting material | Painted spheroidal graphite cast iron |
Stroke | 1 mm ... 2800 mm |
Piston diameter | 100 mm |
Piston rod thread | M12 M16 M16x1.5 M20 M20x1.5 |
Max. angle of rotation of the piston rod +/- | -0.45 deg ... 0.45 deg |
Type code | DSBG |
Based on norm | ISO 15552 |
Cushioning | Elastic cushioning rings/pads at both ends Self-adjusting pneumatic end-position cushioning Pneumatic cushioning, adjustable at both ends |
Mounting position | Any |
Conforms to standard | ISO 15552 |
Piston rod end | External thread Internal thread |
Design | Piston Piston rod Tie rod Cylinder barrel |
Position sensing | For proximity sensor |
Symbol | 00992970 00992971 00991217 00991218 00991235 00991237 |
Variants | For unlubricated operation Bellows on bearing cap Hard scraper Extended external thread piston rod Internal thread on piston rod Special thread on piston rod Extended piston rod Metal scraper With anti-twist protection Constant, slow movement Low friction Through piston rod Heat-resistant seals max. 120°C Temperature range 0 to + 150 °C Temperature range -40 to 80 °C Piston rod at one end Low friction for balancer applications Shortened external piston rod external thread Variable spacer bolt length |
Operating pressure | 0.05 bar ... 12 bar |
Mode of operation | Double-acting |
ATEX category gas | II 2G |
Type of ignition protection for gas | Ex h IIC T4 Gb |
ATEX category for dust | II 2D |
Type of (ignition) protection for dust | Ex h IIIC T120°C Db |
Explosive ambient temperature | -20°C <= Ta <= +60°C |
Explosion prevention and protection | Zone 1 (ATEX) Zone 2 (ATEX) Zone 21 (ATEX) Zone 22 (ATEX) |
Operating medium | Compressed air as per ISO 8573-1:2010 [7:4:4] |
Information on operating and pilot media | Operation with oil lubrication possible (required for further use) |
CE marking (see declaration of conformity) | as per EU explosion protection directive (ATEX) |
Corrosion resistance class (CRC) | 2 - Moderate corrosion stress 3 - High corrosion stress |
Ambient temperature | -40 °C ... 150 °C |
Impact energy in the end positions | 2.5 J |
Cushioning length | 32 mm |
Theoretical force at 6 bar, retracting | 4418 N |
Theoretical force at 6 bar, advancing | 4418 N ... 4712 N |
Moving mass at 0 mm stroke | 1000 g |
Additional weight per 10 mm stroke | 94 g |
Basic weight with 0 mm stroke | 3665 g |
Additional moving mass per 10 mm stroke | 39 g |
Type of mounting | With internal thread With accessories Optionally: |
Pneumatic connection | G1/2 |
Note on materials | Contains paint-wetting impairment substances RoHS-compliant |
Cover material | Die-cast aluminum, coated |
Piston rod material | high-alloy stainless steel, hard chrome plated High-alloy steel High-alloy stainless steel |
Material of cylinder barrel | Wrought aluminum alloy, smooth-anodized |