Your cart
There are no more items in your cart
| Piston seal material | FPM TPE-U(PU) |
| Piston rod wiper seal material | FPM PE TPE-U(PU) |
| Cushion piston material | Aluminum POM |
| Buffer seal material | FPM TPE-U(PU) |
| Material of piston | Wrought aluminum alloy |
| Nut material | High-alloy stainless steel |
| Flange screws material | Steel, galvanized |
| Material of bearing | Metal polymer compound POM |
| Rod wiper seal material | PTFE-reinforced |
| Stroke | 1 mm ... 2800 mm |
| Piston diameter | 125 mm |
| Piston rod thread | M16 M27x2 |
| Type code | DSBF |
| Cushioning | Elastic cushioning rings/pads at both ends Self-adjusting pneumatic end-position cushioning Pneumatic cushioning, adjustable at both ends |
| Mounting position | Any |
| Conforms to standard | ISO 15552 |
| Piston rod end | External thread Internal thread |
| Design | Piston Piston rod Profile barrel |
| Position sensing | For proximity sensor |
| Symbol | 00992970 00992971 00991217 00991218 00991235 00991237 |
| Variants | For unlubricated operation Increased chemical resistance Hard scraper Extended external thread piston rod Internal thread on piston rod Extended piston rod Constant, slow movement Low friction Through piston rod Heat-resistant seals max. 120°C Temperature range 0 to + 150 °C Temperature range -40 to 80 °C |
| Operating pressure | 0.05 bar ... 10 bar |
| Mode of operation | Double-acting |
| Operating medium | Compressed air as per ISO 8573-1:2010 [7:4:4] |
| Information on operating and pilot media | Operation with oil lubrication possible (required for further use) |
| Corrosion resistance class (CRC) | 3 - High corrosion stress |
| For use in the food industry | See supplementary material information |
| Ambient temperature | -40 °C ... 150 °C |
| Impact energy in the end positions | 1.65 J ... 3.3 J |
| Cushioning length | 44 mm ... 45 mm |
| Theoretical force at 6 bar, retracting | 6881 N |
| Theoretical force at 6 bar, advancing | 6681 N ... 7363 N |
| Moving mass at 0 mm stroke | 2245 g ... 3084 g |
| Additional weight per 10 mm stroke | 163 g ... 226 g |
| Basic weight with 0 mm stroke | 6928 g ... 7767 g |
| Additional moving mass per 10 mm stroke | 63 g ... 126 g |
| Type of mounting | With internal thread With accessories Optionally: |
| Pneumatic connection | G1/2 |
| Note on materials | Contains paint-wetting impairment substances RoHS-compliant |
| Cover material | Die-cast aluminum, coated |
| Piston rod material | High-alloy stainless steel |
| Material of cylinder barrel | Wrought aluminum alloy, anodized |
