Your cart
There are no more items in your cart
| Dimensions W x L x H | (incl. interlinking block) 50 mm x 107 mm x 50 mm |
| Type code | CPX |
| Fieldbus interface | 2x M12x1, 5-pin Sub-D socket, 9-pin Terminal strip, 5-pin Customizable Sub-D plug |
| Device-specific diagnostics | Channel-oriented and module-oriented diagnostics Undervoltage of modules Diagnostic memory |
| Configuration support | EDS file |
| Parameterization | Diagnostic behavior Fail-safe response forcing of channels Signal setup System parameter |
| Additional functions | Acyclic data access via "SDO" Channel-based diagnostics via fieldbus Start-up parameterization in plain text via fieldbus System status can be indicated via process data Additional diagnostic interface for operator units |
| Control elements | DIL switch |
| Baud rate | 125, 250, 500 and 1000 kbit/s |
| DC operating voltage range | 18 V ... 30 V |
| Intrinsic current consumption at nominal operating voltage | Typ. 200 mA |
| Nominal operating voltage DC | 24 V |
| Corrosion resistance class (CRC) | 1 - Low corrosion stress |
| Storage temperature | -20 °C ... 70 °C |
| Degree of protection | IP65 IP67 |
| Ambient temperature | -5 °C ... 50 °C |
| Product weight | 115 g |
| Max. address capacity outputs | 32 byte |
| Max. address capacity inputs | 32 byte |
| Protocol | CANopen |
| LED display (bus-specific) | IO: I/O status MS: module status NS: network status |
| LED display (product-specific) | M: Modify, parameterization PL: load supply PS: electronics supply, sensor supply SF: system fault |
| Housing material | PA-reinforced PC |
