Your cart
There are no more items in your cart
Type code | CECC |
Certificate issuing authority | UL E239998-D1001 |
Max. power supply | 6 A |
Nominal operating voltage DC | 24 V |
Max. cable length | 30 m inputs |
Corrosion resistance class (CRC) | 0 - No corrosion stress |
Certification | RCM compliance mark c UL us - Listed (OL) |
Note on materials | RoHS-compliant |
Operating voltage | 19.2 - 30 V DC |
Current consumption | 100 mA nominal at 24 V DC |
Ambient temperature | 0 °C ... 55 °C |
Storage temperature | -25 °C ... 70 °C |
Relative air humidity | 95 % Non-condensing |
Degree of protection | IP20 |
Protection class | III |
Product weight | 200 g |
Resistance to vibration | as per EN 61131-2 |
Resistance to shock | as per EN 61131-2 |
Electrical connection technology I/O | Socket strip, 3.5 mm grid |
Status indications | LED |
CPU data | 400 MHz processor |
Digital inputs, number | 12 |
Digital inputs, switching logic | Positive logic (PNP) |
Digital inputs, fast clock pulse inputs | 2, each with max. 180 kHz |
Digital inputs, input signal delay | 3 ms typ. |
Digital inputs, input voltage/current | 24 V DC |
Digital inputs, nominal value for TRUE | >= 15 V DC |
Digital inputs, nominal value for FALSE | <= 5 V DC |
Digital inputs, electrical isolation | Yes, optocoupler |
Digital inputs, status indication | LED |
Digital outputs, number | 8 |
Digital outputs, switching logic | Positive logic (PNP) |
Digital outputs, contact | Transistor |
Digital outputs, output voltage | 24 V DC |
Digital outputs, output current | 500 mA |
Digital outputs, potential separation | Yes, optocoupler |
Digital outputs, switching frequency | max. 1 kHz |
Digital outputs, short circuit current rating | yes |
Digital outputs, status indication | LED |
Protocol | CANopen I-Port IO-Link® Modbus® TCP |
IO-Link®, protocol version | Device V 1.0 Master V 1.1 |
IO-Link®, communication mode | Master SIO, COM1 (4.8 kBd), COM2 (38.4 kBd), COM3 (230.4 kBd) Device COM1 (4.8 kBd), COM2 (38.4 kBd), COM3 (230.4 kBd) Configurable via software |
IO-Link®, port class | Device A Master B |
IO-Link®, number of ports | Device 1 Master 4 |
IO-Link®, process data width OUT | Master parameterizable 2 - 32 bytes |
IO-Link®, process data width IN | Master parameterizable 2 - 32 bytes |
IO-Link®, minimum cycle time | Device 3.2 ms Master 5 ms |
IO-Link®, data memory available | 2 kByte/port |
IO-Link®, output current | 3.5 A/port |
IO-Link®, Connection technology | Cage Clamp® Plug Master 5-pin Device, 3-pin |
IO-Link®, communication | C/Q LED green C/Q LED red |
IO-Link®, ready status indication | L+ green LED on L+ green LED off |
Fieldbus interface, type | CAN bus |
Fieldbus interface, connection technology | Plug Sub-D 9-pin |
Fieldbus interface, transmission rate | 125, 250, 500, 800, 1000 kbit/s Adjustable via software |
Fieldbus interface, galvanic isolation | yes |
USB interface | USB 1.1 |
Ethernet, connector plug | RJ45 |
Ethernet, number | 1 |
Ethernet, data transmission speed | 10/100 Mbit/s |
Ethernet, supported protocols | TCP/IP, EasyIP, Modbus® TCP |
Programming software | CODESYS provided by Festo V3 |
Programming language | as per IEC 61131-3 KOP AWL ST FUP AS |
CE marking (see declaration of conformity) | As per EU EMC directive |